OUR SERVICES
Engineering Consultancy Providing Services
Quantity Surveying Services in :
MEP
- 01. HVAC (Heating Ventilation & Air conditioning) HVAC Services specialty in Air Conditioning of varied types of projects that include:
- Concept, Design and Scope of works for approval of the client.
- Cooling & Heating load data in Carrier’s HAP software in accordance with ASHRAE standards.
- Design of Ventilation system in compliance with ASHRAE standards.
- Design of Smoke management system in compliance with ASHRAE and NFPA Standards.
- Selection of Equipment's-DX system, Chilled water system and Fans etc..,
- Ducting & Piping design as per SMACNA with specific supports and hangers.
- Shop drawings are prepared based on the above outputs are well coordinated with other trades like architecture, structure, plumbing and Electrical to facilitate hassle free construction at site.
- Preparation of As-built drawings based on completed site data.
- 02. Plumbing & Fire Fighting Plumbing Services team is very well
experienced in varied types of PHE and Firefighting applications
that include,
- Preparation of Concept design and Scope of works for approval of Client / Consultant
- Water supply and Drainage systems in accordance with UPC, IPC & ASME standards
- Firefighting protocols and systems in accordance with NFPA standards
- Shop drawings are prepared based on the above outputs which are well coordinated with other trades to facilitate the construction at site
- As-built drawings based on completed site data
- 03. Electrical - High Current services includes but not Limited to -
- Lighting Layout
- Cable Tray Layout
- Conduit Installation
- Earthing & Lightning protection
- Electrical Installation Details
- Panel Board Schedules, Single Line Diagram & BOQ
- As-built drawings based on completed site data
- 04. Electrical - Low Current services includes but not Limited to -
- Preliminary design & solutions for presentations
- Drawings and design documents for tendering
- Detailed drawings and design documents for subcontracting
- Shop drawings and execution documents for construction on sites
- Take-off Bills of Quantities for tendering and Subcontracting
Quantity Measurement/Materials Take Off in
CIVIL & ARCHITECTURAL Services.
- Bill of Quantities Preparation/MTO
- Value Engineering
- Packaging at Procurement Stage
- Bill Validation during Tendering or Construction Phase
- As-Built Bill of Quantities for final Account settlement.
Design & Detailing Services
UVEN Ecs Provides Excellent solutions in the following Areas:
- Engineering Design & Detailing services, production of shop drawings in
- Architectural
- Structural
- Mechanical, Electrical & Plumbing services.
- BIM (Building Information Modeling)
- 3D Modeling Architectural
- 3D Modeling Structural
- 3D Modeling MEP
- Clash Detection & Co-Ordination
- Shop Drawings
- Family Creation
- 4D Simulation
- Quantity Surveying & Material Take off
Standard of Measurements
Methods of Measurements.
We are experts in various international Measurement Codes, such as POMI, SMM7, QSMM, CESMM3, NRM2, HMM, ARM3, Australia SMM and IS 1200 etc.